Waste water evaporator
Waste water evaporator For chemical organic wastewater characteristics such as high salt concentration, based on the principle of evaporation concentration crystal. USES the multistage decompression evaporation crystallization concentrated organic wastewater, the concentrate of salt after the separation, recycle, via the collection of salt concentrate drying recycling or incineration, and after the evaporation of condensed water usually by the subsequent biochemical treatment process, can realize wastewater discharge standard.
Evaporator evaporation from small to large, divided into 1-30 tons per hour than four effect evaporator concentration up to 10~15%.Can according to the turnkey project completion.
The basic information
A effect evaporator Direct the condenser
The second effect evaporator Condensed water heater
Three effect evaporator A centrifugal pump
Four effect evaporator Field instruments
Display, control cabinet cooling water tank
Platform framework piping
Installation, debugging, engineering design, technical services
2, containing ammonium chloride wastewater multiple effect evaporator to relieve stress
The second effect evaporator crystallization device is introduced
Two heat pump evaporation process, takes into consideration the discharge temperature of concentrate, ensure concentrate not precipitate crystallization.
Concentrate feed after preheater first, and then into the evaporator, separated the preheat sections and evaporation, and all the evaporator pipe used for evaporation, the evaporation efficiency of the improved evaporator.Concentrate grade preheating make full use of the latent heat of low temperature steam improves the thermal efficiency.
The first of the condensed water heating chamber into the shell side of the second effect of the heating chamber, will flash off part of the steam, make full use of the sensible heat of high temperature condensed water, reduce the steam consumption.
The first effect evaporator using low heat, can increase the extraction coefficient of heat pump, a complete set of equipment of the steam consumption is 0.45 tons of steam/tons of water.
A effect evaporator Direct the condenser
An effective separation chamber The secondary steam piping
The second effect evaporator vacuum pump
Two effective separation chamber instrument distribution valve line platform
Heat pump material storage tank
Circulating pump crystallization cans
Condensing water centrifuge
The characteristics of
1, evaporation of water can reach 0.5 t/h ~ 100 t/h 
(2) when the normal operation of the system only USES electricity, evaporation of water consumption per ton of 15 kw. H to 100 kw. J h, its operating cost for multiple effect evaporation 1/8 ~ 1/2.
(3) is currently the most energy-efficient evaporator, mostly single effect evaporation, the heating temperature difference is small, short residence time, suitable for heat-sensitive materials.
(4) the structure is compact, cover an area of an area small.
(5) through the PLC control to realize automatic operation equipment, long-term continuous and stable operation.
2, steam compressor
Waste water evaporator for mechanical evaporator, its main characteristic is that the steam compressor.Steam compressor by mechanical compression, and improve the steam pressure and temperature.In accordance with the requirements of air volume and compression choose different types of compressors, steam steam compressor speed by frequency converter to adjust, compressor rotation speed can be adjusted according to actual demand compressor is equipped with temperature monitoring sensor and vibration sensor, ensure the normal operation for a long time.
Changzhou Ruide Drying Engineering Technology Co., Ltd
Changzhou Ruide Drying Engineering Technology Co., Ltd. is a professional manufacturer of drying, mixing, granulating and grinding equipment. Our firm has strong technical force and adopts CAD system, with a modern workshop. Our company is located in the economic center of Yangtze River Delta - Changzhou. Our company has a large-scale manufacturing site. The engineers and technicians account for more than 70% of total staff members. In accordance with the national GMP standard, Our company has a professional team with support from Tianji University, Dalian university of technology and many other famous universities. We keep up with the latest international development within our scope and advocate scientific orientation. Our company is possessed with excellent means of detection and advanced conception of management. We can meet the requirements of domestic and international customers. The production of our equipment conforms strictly to the ISO9001 international quality management system. Their successful application is in the scope of pharmaceutical,chemical, foodstuff industries and so on, which has achieved the internationalization of the product quality. The honest and practical conduct of enterprise, excellent product quality, precise follow-up maintenance service and excellent after-sale service have gained us market and credit.
- Company Name: Changzhou Ruide Drying Engineering Technology Co., Ltd
- Representative: Zhongxing Liu
- Product/Service: Drying Equipment , Mixing Equipment , Granulating Equipment , Sieving Equipment , Grinding Equipment , Conveying Equipment
- Capital (Million US $): 10,000,000RMB
- Year Established: 2015
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 71% - 80%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Jiaoxi Town, Wujin District, Changzhou City, Jiangsu Province
- Contact Person: Mr. Denis
- Tel: 86-519-68231907